Manufacturer Standard: EN16630 (legacy standards - PAS888, Din79000)
Framework: Mild Steel Grade S275 (min 3mm thick)
Bearing Surfaces: Grade 316 stainless steel
Finish: High quality gloss finish polyester powder coat paint
Console: Aluminium and high quality reverse printed PETG signage
An enhanced corrosion protection is available on request for this product. Hot dip galvanising is the process TGO use to add a protective coating to the body of our products on our equipment in coastal areas, which have higher air salinity or in harsh urban and industrial atmospheres with higher sulphur dioxide pollution*.
The upgrade includes:
- Upgrading to hot dip galvanising
- Fixings are upgraded from A2 to A4 stainless steel
*An upgrade to galvanised steel will be necessary for the warranty in these environments.
This product is installed onto a generic TGO Medium Ground Anchor. Please see the ‘TGOGC Installation & Assembly Guidelines’ for guidance on installing this anchor. Please refer to the PDF below for safety spacing and orientation details.
This product requires 1.5m of clear space around the equipment (green outline).
- Falling height: 0.0m*
- Clear Space: 12.5m²
There is no safer surface requirement and therefore TGO only recommend a minimal surface area (grey outline).
USB Output: Twin USB output 5V, 1A (Global industry standard)
Power Output (glow/flow): Max 100W. Avg 40W, Max 30V
Electrical Storage: IP65 Rated
No
|
Part
|
Dimensions
|
Weight
|
Qty
|
1
|
Hand Bike
|
L594, W453, H1214
|
76.5kg
|
1
|
2
|
Medium Anchor*
|
L429, W429, H344
|
14kg
|
1
|
* Substituted with 4x HILTI fixings for surface mounted option