Manufacturer Standard: EN16630 (legacy standards - PAS888, Din79000)
Framework: Mild Steel Grade S275 (min 3mm thick)
Finish: High quality gloss finish polyester powder coat paint
Signage: High quality reverse printed PETG (Integrated coming soon)
Backs: Enhanced Polyphenylene Ether (PPE) Resin
An enhanced corrosion protection is available on request for this product. Hot dip galvanising is the process TGO use to add a protective coating to the body of our products on our equipment in coastal areas, which have higher air salinity or in harsh urban and industrial atmospheres with higher sulphur dioxide pollution*.
The upgrade includes:
- Upgrading to hot dip galvanising
- Fixings are upgraded from A2 to A4 stainless steel
*An upgrade to galvanised steel will be necessary for the warranty in these environments.
This product is installed onto three generic TGO Large Ground Anchors. Please see the ‘TGOGC Installation & Assembly Guidelines’ for guidance on installing this anchor. Leg Press spacing is based on 5ft (1524mm) to 6ft (1829mm) individuals.
This product requires 1.5m of clear space around the equipment (green outline).
- Fall height: 0.6m
- Clear Space: 16.2m²
There is no safer surface requirement and therefore TGO only recommend a minimal surface area (grey outline).
No
|
Part
|
Dimensions
|
Weight
|
Qty
|
1
|
Leg Press Track Assembly**
|
L1207, W561, H1021
|
95kg
|
1
|
2
|
Leg Press Platen***
|
L168, W466, H401
|
11.3kg
|
1
|
3
|
Chest Press / Seated Row
|
L2064, W938, H1781
|
128kg
|
1
|
4
|
Bench
|
L1182, W523, H1610
|
108kg
|
1
|
5
|
Large Ground Anchor*
|
L777, W489, H344
|
23kg
|
3
|
* Substituted with 6x HILTI fixings for surface mounted option
** Based on the product in a rested position
*** Including four (4) spreader plates